Pre-Operation - Campbell Hausfeld IN470200AV Operating Instructions And Parts List Manual

Pressure Washer

Pre-Operation

3 . Secure garden hose (not included) to the inlet connection
on pump .
4 . Connect the high pressure hose to the pump outlet (See
Figures 2 and 5) .
Figure 5 – Connect high pressure hose
to pump
5 . Attach the lance to the gun (see Figure 6) .
Figure 6 – Attach lance to gun
6 . Install quick connect tip by pulling back on collar and
pressing in tip . Release collar, make sure it completely
returns to its forward position and tip is secure (see Figure
7) .
Pull collar back
Figure 7 – Installing quick connect tip
www.chpower.com
7 . Install quick connect tips to tip holder and secure to the
pressure washer handle . See Figure 8 .
Figure 8 – Insert spray tips into the rubber tip holder
TrIGGer SAFeTY LATCH
In the engaged position, the trigger safety latch prevents the
gun from being triggered accidentally . Push the latch fully up
to engage it (See Figure 9) .
Always engage the trigger safety latch when the unit is not in
use .
Engaged
Figure 9a - Trigger locked
Figure 9b - Trigger unlocked
6
Disengaged