Pre-Operation - Campbell Hausfeld Maxus IN469101AV Operating Instructions And Parts List Manual

Safety and Warning Information (Continued)
• Release the trigger when changing from high to low
pressure modes. Failure to do so could result in damage
to the nozzle.
cause injury. Examine hoses regularly and replace if
damaged. Do not attempt to mend a damaged hose.

Pre-Operation

UNPACKING
Remove the equipment and all parts from the carton. The
carton should contain the following.
• One pressure washer (pump, engine, cart base)
• One cart handle assembly
• One spray gun
• One lance
• One tip holder with 2 spray tips. Additional tips available
for purchase, see Page 13
• One high pressure hose
• One pack of nuts, bolts, and manuals
If any parts are missing, DO NOT RETURN THE UNIT TO THE
RETAILER. Know the unit's model number (located on the
serial number tag on the pressure washer frame) and call 1-
888-Maxus4U for replacement parts.
After unpacking the product, inspect it carefully for any
damage that may have occurred during transit. Make sure to
tighten fittings and bolts before using the pressure washer.
handling, or use. Damage could result in bursting and cause
injury or property damage.
ASSEMBLY
Use two adjustable or 7/16 inch wrenches to assemble the
pressure washer.
Thermal
Brass swivel
relief valve
adapter
Pump inlet
Garden hose
Figure 2 - Pump hook up
Keep hose away from sharp
objects. Bursting hoses may
Do not operate the unit if it's
damaged during shipping,
1. Slide the handle assembly over the lower legs of the cart
base. Use the supplied nuts and bolts to secure the
handle to the legs. See Figure 1.
Figure 1 – Assemble Handle
2. Brass Swivel Adaptor (See Figure 2). If it's not already
attached to the pump inlet, assemble the brass swivel adapter
and attach it to the pump inlet (See Figure 3 and Figure 4). Be
sure to connect the correct side of the brass swivel adapter to
the pump.
Connect this end to garden hose
Washer
with filter
Connect this end to pump
screen
Figure 3 - Brass swivel adapter
Chemical injector
hose barb
High
Pump
pressure
outlet
hose
Figure 4 - Connect the brass swivel to
the pump
5
Pressure Washer
Washer
Brass swivel adapter
Pump inlet
www.maxustools.com