VWR PCR Workstation HEPA Quick Start Manual page 10

Care and cleaning
The front and side panels are made of polycarbonate and are subject to scuffing and scratches if
improperly cleaned. Therefore, it is strongly recommended to use a soft cloth (preferentially microfiber)
for cleaning.
•
Wipe excess water from inside the unit and outside the unit with an absorbent soft cloth or sponge.
•
Use mild detergent and water with a soft cloth or sponge to clean the exterior and interior of the
unit.
•
Clean the front and side panels with a mild detergent only.
•
Do not use abrasive pads or cleansers.
•
A plastic cleaner solution is recommended to clean the front panel and is available from local plastic
supply distributors.
Never use organic based compounds like acetone or ammonia containing cleaners for polycarbonate
panels!
Due to the specific qualities of polycarbonate panels made of Makrolon
cleaning.
All metal parts consist of stainless steel V2A. Stainless steels have sufficient corrosion protection
against normal environmental influences. It is strongly recommended to use a stainless-steel cleaning
and care reagent. Never use aggressive cleaning reagents.
Warning: Unplug the unit before cleaning around the UV tube contacts and internal plug outlets.
FOR MORE DETAILS, TECHNICAL SERVICE AND ORDER INFORMATION,
PLEASE CONSULT THE FULL MANUAL
®
70 % ethanol can be used for