Delayed Refill; Pressure; Test Refill - Bunn Ultra NX Programming Manual

AUTO REFILL
(continued)

TEST REFILL

NO YES
END

DELAYED REFILL

This feature is used to fill the hoppers in small increments until product touches the level probe. Between
increments, there is a delay time that can be adjusted in programming. This can prevent the frozen product
that is already in the hopper from becoming diluted and not ready to serve. The delay and fill times are to be
determined and set based on each application as desired by the operator.
I
DELAYED REFILL
O
( - ) ON (+)
enter
select On

PRESSURE

This feature allows the operator to see the PSI status for the left and right sides.
available for CFV models.
TEST REFILL
This feature allows the operator to activate the refill valves for calibration or testing purposes.
I
TEST REFILL?
O
N O Y E S
PROGRAMMING
Press left or right hidden switch to enter and test the refill valves. See
page 16 for more information about this menu.
I
FILL TIME SECONDS
O
( - )
(-) minus
select Off
I
L PRESSURE R
O
G O O D N E X T L OW
I
LEFT REFILL VLV
O
O N N E X T O F F
select On
15 (+)
(+) plus
enter
select Off
14
I
DELAY TIME MINUTES
O
( - ) 5 (+)
The pressure status is only
I
RIGHT REFILL VLV
O
O N N E X T O F F