Low Level To Chill; Refill Threshold - Bunn Ultra NX Programming Manual

SETTINGS
(continued)

LOW LEVEL TO CHILL

This feature is only available if Low Level Detect is enabled. It allows the operator to set a chill time for
when product is low in the hopper(s). After the set amount of time the product would switch from ICE to
CHILL if left low in the hopper(s).

REFILL THRESHOLD

This software allows the operator to adjust the refill threshold for LAF and CFV models. At the refill thresh-
old screen, with no product in the hopper, the number on the left (top) of the screen is normally around
250. The number on the right of the screen is factory set to 155. The factory set point should not need any
adjustment.
I
O
(-) minus
PROGRAMMING
I
LowLevelTo CHILL
O
( - )
(-) minus
Left Hopper
250 L REFILL 155
( - ) (+)
THRESHOLD
(+) plus
enter
90 min (+)
enter (+) plus
Right Hopper
I
250 R REFILL 155
O
( - )
THRESHOLD
12
(+)