Restore Factory Settings - Hi-Link HLK-RM04 User Manual

remotepro
timeout
uartpacklen
uartpacktimeout
reconn
Parameter definition is consistent with the web configuration parameter.
7

Restore factory Settings

Support the following way
1. Through the Web page.
2 By keeping the ES/RST pin low level time greater than Trst.
ES/RST
Factory setting parameter values, see the following
IP address
Web username/password
Wifi password
Serial Configure
Serial Framing Lenth
Serial Framing Timeout
Network Mode
Remote Server Domain/IP:
Locale/Remote Port Number
Network Protocol
Network Timeout
mode
uart
save
s to restore the factory settings
>Trst
Network Protocol type
Network timeou t
Network mode
Serial port configuration
Serial group frame length
Serial framing time
Save the configuration and start service
Restart services
t
Reset to Default.
list:
192.168.16.25 4
admin/admi n
12345678
115200,8,n,1
64
10
Server
192.168.11.245
8080
TCP
0