airquee Kick 'N' Stick Dual Lean Additional Operating Instructions
  1. Manuals
  2. Brands
  3. airquee Manuals
  4. Play Sets & Playground Equipment
  5. Kick 'N' Stick Dual Lean
  6. Additional operating instructions

airquee Kick 'N' Stick Dual Lean Additional Operating Instructions

Hide thumbs
1
2
3
4

Advertisement

Table of Contents

AS OWNER/OPERATOR IT IS YOUR RESPONSIBILITY TO WRITE AND CARRY OUT
YOUR OWN RISK ASSESSMENT BEFORE ATTEMPTING TO USE THIS PRODUCT.

Site survey:

1. Carry out a survey of the area where the 'Kick 'N' Stick Dual Lean' will be located,
and check for any overhead/underground cables. It's important that this is carried
out to avoid ground anchors penetrating underground services, and the 'Kick 'N'
Stick Dual Lean' coming into contact with overhead cables when inflated.
2. You should provide an adequate power supply to the fan, this should adhere to
your local power regulations.
3.
Check wind
speed: The industry recommends a maximum wind speed of Force 5
on the Beaufort scale of 28 - 38 kmph (19-24 mph). Force 5 is a fresh breeze when
small trees in leaf begin to sway.
Version 1.3 30/05/17
Kick 'N' Stick Dual Lean
IMPORTANT
Page 1 of 4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Kick 'N' Stick Dual Lean and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for airquee Kick 'N' Stick Dual Lean

Summary of Contents for airquee Kick 'N' Stick Dual Lean

  • Page 1 Kick ‘N’ Stick Dual Lean IMPORTANT AS OWNER/OPERATOR IT IS YOUR RESPONSIBILITY TO WRITE AND CARRY OUT YOUR OWN RISK ASSESSMENT BEFORE ATTEMPTING TO USE THIS PRODUCT. Site survey: 1. Carry out a survey of the area where the ‘Kick ‘N’ Stick Dual Lean’ will be located, and check for any overhead/underground cables.
  • Page 2 This inflatable can be set up and packed away by 2 persons who have had proper manual handling training and use the correct equipment to move the inflatable. The unit always comes with an Airquee Velcro Target Sheet. Page 2 of 4...
  • Page 3 When ordering, you may choose these two Velcro sheets too: Penalty Shoot Out Target Dartboard Target Set up: Unfold and flatten the inflatable. Install the desired Velcro sheets on the uninflated game. If you wish to use the Penalty Shoot Out Target Sheet, you will have to install it on the side of the unit with the extra inflated bottom frame.
  • Page 4 Assembly of the Collecting Stick: Parts of the collecting stick: Head part Middle part End part 1. Attach the Head part to the Middle part by pressing down the two metal buttons and inserting it until they pop out in the two holes of the Middle part. 2.

Table of Contents