Summary of Contents for airquee Kick 'N' Stick Single Sided Upright
Page 1
Kick ‘N’ Stick Single Sided Upright IMPORTANT AS OWNER/OPERATOR IT IS YOUR RESPONSIBILITY TO WRITE AND CARRY OUT YOUR OWN RISK ASSESSMENT BEFORE ATTEMPTING TO USE THIS PRODUCT. Site survey: 1. Carry out a survey of the area where the ‘Kick ‘N’ Stick Single Sided Upright’ will be located, and check for any overhead/underground cables.
Page 2
This inflatable can be set up and packed away by 2 persons who have had proper manual handling training and use the correct equipment to move the inflatable. The unit comes with an Airquee Velcro Target Sheet. Page 2 of 4...
Page 3
When ordering, you may choose the Dartboard Target Velcro sheet too: Set up: Unfold and flatten the inflatable on its Velcro side upwards. Install the desired Velcro sheet on the uninflated game. Please note the Penalty Shoot Out Target Sheet isn’t compatible with this type of Kick ‘N’ Stick. IMPORTANT: Please do not over inflate the balls to avoid damage on the Velcro cover! Players must be minimum 15 metres away from the target, otherwise the ball will...
Page 4
2. Connect the Middle part with the End part by twisting the black handle. 3. Connect the Middle part to the End part by pressing the two metal buttons and inserting it until they pop into the two holes of the End part. All the pictures and drawings are for illustration purposes only.
Need help?
Do you have a question about the Kick 'N' Stick Single Sided Upright and is the answer not in the manual?
Questions and answers