Advertisement
AS THE OWNER/OPERATOR IT IS YOUR RESPONSIBILITY TO WRITE AND CARRY
OUT YOUR OWN RISK ASSESSMENTS BEFORE ATTEMPTING TO USE THIS
PRODUCT.
1. Open up the package and spread the bumper ball on the ground. Leave the
bumper ball on the ground for 10-15 minutes to allow time for the material to
loosen up, afterwards it can be inflated.
2.
Inflate the bumper ball to around 80-90%.
this may reduce the life of your bumper ball due to being used under too
much pressure and this will invalidate your Warranty.
BUMPER BALL
User manual
IMPORTANT
If the bumper ball is over inflated
Page 1 of 3
Advertisement
Table of Contents
Related Manuals for airquee Bumper Ball
Summary of Contents for airquee Bumper Ball
- Page 1 OUT YOUR OWN RISK ASSESSMENTS BEFORE ATTEMPTING TO USE THIS PRODUCT. 1. Open up the package and spread the bumper ball on the ground. Leave the bumper ball on the ground for 10-15 minutes to allow time for the material to loosen up, afterwards it can be inflated.
- Page 2 3. Do not use your bumper ball on tarmac, cement, concrete or any other hard surface 4. PLEASE USE the product on soft surfaces such as grass or astroturf. 5. While using the bumper ball, please do not carry anything unnecessary such as: keys, telephone, glasses (spectacles or even sun glasses).
- Page 3 After using the bumper ball please clean it with water. Afterwads wipe the bumper ball with a cloth until dry. NEVER STORE A BUMPER BALL WHILST WET 8. After you have cleaned the bumper ball, we recommend that you store it in its protective bag. Page 3 of 3...
Need help?
Do you have a question about the Bumper Ball and is the answer not in the manual?
Questions and answers