6.
MAINTENANCE AND CHECK
burn.
is not displayed fully and an accident or failure could come about.
6.1
Check
every 6 months.
Check items
Check for looseness of cable gland.
Check of residue in calibration gas cylinder
ring of detector.
Check by disconnecting for clogging or
Check by removing for clogging or corro-
Check by removing if air outlet port of
All manuals and user guides at all-guides.com
CAUTION
PROHIBITION
as a rough standard by converting the output in a stabilized state
into oxygen concentration according to the standard output table of
replace.
Check it by a primary pressure gauge.
ply).
-
-
-