3.
PIPING
a spanner after it cannot be turned any more by hand.
Joint for calibration gas:
3.2
Piping of reference gas inlet
body.
installation method of piping.
the piping length as short as possible.
All manuals and user guides at all-guides.com
CAUTION
Main body
(calibration gas inlet)
(1) Coupling
(3) Frount ferrule
(4) Back ferrule
(2) Nut
ø6mm or ø1/4inch teflon
tube for piping
-
1 Packing
2 Reference gas inlet