Using A Cd Or Dvd - Gateway MT6831 Reference Manual

Using a CD or DVD

[
exports and help reduce illegal disc distribution. To be able to play a DVD, the
disc's regional code and your DVD drive's regional code must match.
The regional code on your DVD drive is determined by your notebook's delivery
address. The regional code for the United States and Canada is 1. The regional
code for Mexico is 4. Your DVD drive's regional code must match the regional
code of the disc. The regional code for the disc is on the disc, disc
documentation, or packaging.
side is facing up. If the disc has two playable sides, place the disc so the name
of the side you want to play is facing up.
on page 68.
To insert a CD or DVD:
1
2
3
38
CHAPTER 4: Using Drives and Accessories
Important
DVD discs and drives contain regional codes that help control DVD title
Important
When you place a single-sided disc in the tray, make sure that the label
Tip
For information about cleaning a CD or DVD, see
Press the eject button on the CD or DVD drive. After the
tray opens slightly, pull the disc tray completely open.
Place the disc in the tray with the label facing up, then
press down carefully on the disc until it snaps into place.
Push the tray in until it is closed.
Manual eject hole
Eject button
"Cleaning CDs or DVDs"