Using Power Saving Modes - Gateway MT6831 Reference Manual

www.gateway.com
•
Hybrid Sleep - while your notebook is in Hybrid Sleep
mode, it switches to a low power state where devices,
such as the display and drives, turn off similar to Sleep
mode. The notebook also writes all current memory
(RAM) information to the hard drive similar to Hibernate
mode. If your notebook experiences a power outage
while in Hybrid Sleep mode, the notebook reads the
memory information from the hard drive and opens the
programs and documents that were open when you
activated Hybrid Sleep mode. If the notebook does not
experience a power outage while in Hybrid Sleep mode,
it restarts using the information in current memory,
thus reducing startup time. You must turn on Hybrid
Sleep mode to use it. For more information, see
"Changing advanced settings" on page

Using power saving modes

Always save your work before using Sleep mode. In Sleep
mode, your notebook reduces or turns off the power to most
devices except memory. However, the information in memory
is not saved to the hard drive. If power is interrupted, the
information is lost.
When in Hibernate mode, your notebook saves all memory
information to the hard drive, then turns the power
completely off.
If your notebook
is...
On
On
In Sleep, Hybrid
Sleep, or Hibernate
mode
...and you want
to...
Enter Sleep or
Hybrid Sleep
mode
Enter Hibernate
mode
Exit Sleep,
Hybrid Sleep, or
Hibernate mode
57.
...then
Press F +F3.
N
Click (Start), click
the arrow next to the
power icon, then click
Hibernate.
Press the power
button.
55