How to set up the system
Before cable connection, switch power off.
Use the AC adapter AW-PS505A for power supply. Use the DC cable supplied to AC adapter.
For details on connecting individual devices, refer to the respective operating instructions.
For details on operating individual devices, refer to the respective operating instructions.
In case of using a remote operation panel (AW-CB400)
Zoom lens
VTR, etc.
Unit with SDI input
Camera
Remote cable
(for zoom/focus control)
Camera cable
Coaxial cable:
( BELDEN 8281 or
equivalent)
max. 656 ft. (200 m)
Rear view of camera
G/L OUT
AW-CA50T8G
Remote operation
Cable provided
with AC adapter
Cable provided with AC adapter
AC adapter:
AW-PS505A
- 9 -
Video monitor,
Sync generator
VTR, etc.
VIDEO IN
Control IN/OUT
panel:
AW-CB400
AC adapter:
AW-PS505A