Setting Date/Time (Clock Set); Changing The Clock Setting - Panasonic DMC-G1K Operating Instructions Manual

Setting Date/Time (Clock Set)

The clock is not set when the camera is shipped.
•
Turn the camera on.
A [MENU/SET] button
Press [MENU/SET].
Press 2/1 to select the items (year, month,
day, hour, minute, display sequence or time
display format), and press 3/4 to set.
A: Time at the home area
B: Time at the travel destination (P133)
‚: Cancel without setting the clock.
Select either [24HRS] or [AM/PM] for the time display
•
format.
AM/PM is displayed when [AM/PM] is selected.
•
When [AM/PM] is selected as the time display format, midnight is displayed as AM
•
12:00 and noon is displayed as PM 12:00. This display format is common in the US and
elsewhere.
Press [MENU/SET] to set.
Turn the camera off after finishing setting the clock. Then turn it on and check that the
•
clock setting is correct.
When [MENU/SET] has been pressed to complete the settings without the clock having
•
been set, set the clock correctly by following the
procedure below.
Select [CLOCK SET] in the [SETUP] menu, and press 1. (P27)
It can be changed in steps
•
The clock setting is maintained for 3 months using the built-in clock battery even
•
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)

Changing the clock setting

3 4
and to set the clock.
:
:
"
Changing the clock setting
Preparation
ON
OFF
MENU
/SET
"
25
VQT1U50