Childcare KOPILOT User Manual page 11

Make the electrical connections:
6
Battery
Alternator
Peel o around 3 feet of cable cover from the (3) wire harness end. Locate
the red cable and use the electrical connector (4) to attach it to the fuse
holder (5) cable. Use the other end of the fuse holder (5) and crimp the ring
terminal (6). Connect the ring terminal to the bolt of the battery (+)
connector.
Locate the black cable and use the ring terminal (6) to connect it to the
bolt of the battery (-).
Locate the yellow cable and use the ring terminal (6) to connect it to the
signal of the alternator. Usually this signal is labeled as "R".
Note: The yellow cable (Input 1) is used for the device to detect
the engine is running. This cable can be also connected it to a
di erent part such as the key switch (ON position).
You can now reconnect the power on the vehicle following safety
procedures.
5 4
Black
6
6
Yellow
Red
3
11