Table of Contents
Advertisement
/ Wire Harness
Installation
To make all electrical connections it is extremely recommended to
disconnect the positive wire from the battery. For vehicles witch master
switch, please switch o the master.
Locate the connector of the wire harness and plug it in to the module. Next
step is to guide the cable to the engine compartment.
Extend the cable through a safe route. As a guide the lights dome of the
cabin has a route to the front of the vehicle that could be used.
Engine
Compartment*
Cut the excess of cable if any.
10
B
1
3
*The position of the engine compartment
depends on the model and type of vehicle
CAUTION
Wear protective
equipment
Kopilot
A
Childcare
Module
Advertisement
Table of Contents
