Related Manuals for Childcare Swift Car Red 022012-012
Summary of Contents for Childcare Swift Car Red 022012-012
- Page 1 Swift Car Walker “Red” Model # 022012-012 IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS Read all instructions before assembly and use of the walker. Keep instructions for future use. WARNING - STAIR HAZARD AVOID SERIOUS INJURY OR DEATH: BLOCK STAIRS/STEPS SECURELY BEFORE USING WALKER. WARNING BEFORE ASSEMBLING THIS WALKER, READ AND UNDERSTAND THE INSTRUCTIONS. Never leave a child unattended. -
Page 3: Battery Safety Information
SAFETY PRECAUTIONS Keep medication, strings, elastics and small toys out of reach from any position of the walker. ALWAYS attach the toys tightly to the walker according to the instructions. Check frequently. This walker should be used only for short periods of time eg: 20mins Battery Safety Information In exceptional circumstances, batteries leak fluids that can cause a chemical burn injury or ruin your product. - Page 4 CONGRATULATIONS Congratulations on your purchase of the Swift Car Walker “Red” This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
- Page 5 In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000. Supplied loose in box: Main frame Seat pad Toy tray Seat support Rear spoiler Rear wheel Side mirror Front castor There are no accessories recommended for use with this Childcare Walker.
- Page 6 ASSEMBLY CONTENTS / ASSEMBLY / OPERATING INSTRUCTIONS Supplied loose in box: Toy wheel Friction blocks IMPORTANT! Please note that a screwdriver (not included) is required to access the Toy Tray Battery Pack to insert 2 x AA Batteries (sold separately). To assemble Toy Wheels...
- Page 7 ASSEMBLY / OPERATING INSTRUCTIONS To assemble Front Castors continued... Push the castors into the position (the hole closest to the edge of the front of the walker), until it is fully locked as shown in the image opposite. To assemble Rear Wheels... Insert the Rear Wheels into the frame by aligning the slot and pressing in until it is fully locked as shown in the image opposite.
- Page 8 ASSEMBLY / OPERATING INSTRUCTIONS To assemble rear Seat Support continued... Unit should now resemble the image opposite. To assemble Seat Pad... Place the Seat Pad over the rear Seat Support with the warning label facing the rear. Push the plastic tabs through the openings in the Main Frame provided.
- Page 9 ASSEMBLY / OPERATING INSTRUCTIONS To assemble Side Mirrors... Push the Side Mirrors into the top frame. Unit should now resemble the image opposite. To assemble Rear Spoiler... Push the Rear Spoiler into slots located on the Rear Upper Tray until it “clicks” and locks into position.
- Page 10 ASSEMBLY / OPERATING INSTRUCTIONS To adjust Unit Height... To adjust the height of the unit, flip the unit over. Grasp the base to prevent it from collapsing. Twist red knob clockwise. Push red knob in while sliding unit to desired height.
-
Page 11: Maintenance
HOW TO CARE FOR YOUR CHILDCARE WALKER Cleaning This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference. - Page 12 Distributed in Australia by CNP Brands Distributed in New Zealand by Wainhouse 20 Calarco Drive, Distribution Derrimut, VIC, 3030 2-6 Argyle St, Morningside, Customer Service 1300 667 137 PO Box 41-014, St Lukes, Auckland, New Zealand W: www.cnpbrands.com.au Customer Service: 0800 567 5000 E: info@cnpbrands.com.au E: helpline@wainhousedist.co.nz F: www.facebook.com/CNPBrands...