Advertisement
Quick Links
Advertisement
Related Manuals for Childcare Cruz 3in1 Trios 022013-389
Summary of Contents for Childcare Cruz 3in1 Trios 022013-389
- Page 1 Cruz 3in1 Walker “Trios” Model # 022013-389 IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY...
- Page 2 SAFETY PRECAUTIONS Read all instructions before assembly and use of the walker. Keep instructions for future use. WARNING - STAIR HAZARD AVOID SERIOUS INJURY OR DEATH: BLOCK STAIRS/STEPS SECURELY BEFORE USING WALKER. WARNING BEFORE ASSEMBLING THIS WALKER, READ AND UNDERSTAND THE INSTRUCTIONS. Never leave a child unattended.
-
Page 3: Battery Safety Information
SAFETY PRECAUTIONS Care must be taken while folding and unfolding the walker to prevent fingers being caught. Keep medication, strings, elastics and small toys out of reach from any position of the walker. ALWAYS attach the toy tray tightly to the walker according to the instructions. Check frequently. Toys should always be assembled by an adult. - Page 4 CONGRATULATIONS Congratulations on your purchase of the Cruz 3in1 Walker “Trios” This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
- Page 5 ASSEMBLY CONTENTS Check what you have received... You have received 1 box. Please check the contents of the box against the list below. If anything is missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000.
- Page 6 Supplied loose in box continued: Seat with fold out Rear support There are no accessories recommended for use with this Childcare Walker. To assemble Front Castors... Lay the Base Assembly face down. Push the Castors into the position (the hole...
- Page 7 ASSEMBLY / OPERATING INSTRUCTIONS To assemble Walker... Place the Seat Pad on the Top Frame and thread the 8 x plastic clips through the Frame. From the underside, clip the tabs onto the frame lugs. Turn the Base Assembly upright and insert the Front Support by pushing the blue buttons to position one for the lower setting, or position two for the higher position.
- Page 8 ASSEMBLY / OPERATING INSTRUCTIONS To assemble Walker continued... Attach the side arms to the connectors on the underside of the Top Frame, taking care to match the height position chosen at the Front Support. (i.e 1 or 2, marked on the outside of the Top Frame). While holding the red lock down, slide the side arm into the Top Frame.
- Page 9 ASSEMBLY / OPERATING INSTRUCTIONS To assemble Toy Tray continued... Position the rear side of the Toy Tray into the Main Frame. Push the front side of the Toy Tray down to click into position. PLEASE NOTE! The Toy Tray includes 7 melodies. The Walker is now ready for use.
- Page 10 ASSEMBLY / OPERATING INSTRUCTIONS To convert to Trike Mode continued... Replace the Toy Tray onto the Front Support. Extend the Fold Out Arm from inside Seat. Connect the Seat with the fold out arm to the Front Support. Push Fold Out Arm in to lock into the connector.
- Page 11 ASSEMBLY / OPERATING INSTRUCTIONS To convert to Walk Behind Mode... Push the release button on the Front Support and lift Fold Out Arm away. Slide the red lever on the side arm and push the red button on the Seat while sliding the arm to release. Repeat for other side arm.
- Page 12 ASSEMBLY / OPERATING INSTRUCTIONS To convert to different Height Adjustments... There are 2 different height adjustments that allow the Cruz 3in1 Walker to grow with your child in any of it’s 3 modes. Position 1 - Lowest Position Press the number 2 located on the front support and move to the lower position.
-
Page 13: Maintenance
HOW TO CARE FOR YOUR CHILDCARE WALKER Cleaning This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference. - Page 14 Distributed in Australia by CNP Brands Distributed in New Zealand by Wainhouse 20 Calarco Drive, Distribution Derrimut, VIC, 3030 2-6 Argyle St, Morningside, Customer Service 1300 667 137 PO Box 41-014, St Lukes, Auckland, New Zealand W: www.cnpbrands.com.au Customer Service: 0800 567 5000 E: info@cnpbrands.com.au F: www.facebook.com/CNPBrands E: helpline@wainhousedist.co.nz...