Memory Card Reader; Modem (Cable Or Dsl); Modem (Dial-Up) - Gateway 6010GZ - Celeron M 1.4 GHz User Manual

You see a "Not enough memory" error message
■
Close all programs, then restart your notebook.
Help and
Support

Memory card reader

Drive letter for the memory card slot does not appear in the My
Computer window
■
Reboot your notebook.

Modem (cable or DSL)

■ Make sure that the modem cable is plugged into the Ethernet
network jack and not the modem jack. See
to make sure that the connections have been made correctly.
■ See the documentation that came with your modem for additional
troubleshooting information.

Modem (dial-up)

Your modem does not dial or does not connect
■
Make sure that the modem cable is plugged into the modem jack
and not the Ethernet network jack. See
sure that the connections have been made correctly.
■ Make sure that your notebook is connected to the telephone line
and the telephone line has a dial tone.
■ Make sure that the modem cable is less than 6 feet (1.8 meters) long.
■ Remove any line splitters or surge protectors from your telephone
line, then check for a dial tone by plugging a working telephone into
the telephone wall jack.
For more information about troubleshooting memory
errors, click Start, then click Help and Support. Type the
keyword memory error in the Search box
www.gateway.com
Troubleshooting
, then click the arrow.
"Right" on page 12
"Right" on page 12
or
to make
95