About This Manual - Dynamic Shark Quick Start Manual

About this manual

This manual must be read together with all other relevant SHARK Module manuals, as well as all applicable
Dynamic Controls Technical Service Bulletins (TSBs), application notes and service instructions.
In this manual, a few symbols will help you identify the purpose of the paragraph that follows:
Notes & Precautions:
Notes provide supporting information in order to install, configure, and use
the product. Not following the instructions given in notes or precautions
can lead to equipment failure.
Warnings:
Warnings provide important information that must be followed in order to
install, configure, and use the product safely and efficiently. Not following
the instructions given in a warning can potentially lead to equipment
failure, damage to surrounding property, injury or death.
The term „programming‟ used throughout this manual refers to adjusting parameters and configuring
options to suit an application. „Programming‟ does not change or alter any software within the controller
and is performed using a controlled programming tool available only to authorised personnel.
SHARK is not user serviceable. Specialized tools are necessary for the repair of any SHARK component.
Due to continuous product improvement Dynamic Controls reserves the right to update this manual. This
manual supersedes all previous issues, which must no longer be used.
Dynamic Controls reserves the right to change the product without notification.
Any attempt to gain access to or in any way abuse the electronic components and associated assemblies
that make up the powerchair system renders the manufacturer‟s warranty void and the manufacturer free
from liability.
Dynamic Controls and the Dynamic Controls logo are trademarks of Dynamic Controls.
All other brand and product names, fonts, and company names and logos are trademarks or registered
trademarks of their respective companies.
Dynamic Controls owns and will retain all trademark rights and Dynamic Controls or its licensors own and
will retain all copyright, trade secret and other proprietary rights, in and to the documentation.
All materials contained within this manual, in hard-copy or electronic format, are protected by copyright
laws and other intellectual property laws.
© Copyright 2011 Dynamic Controls, Christchurch, New Zealand. All rights reserved.
2
About this manual