Advertisement
Step 10
Fit the hopper.
Step 11
On the points depicted, insert the screws through the hopper. Tighten them to fix the hopper to the
frame. Insert a cotter through the spindle of the drive unit in the middle part of the hopper. This will serve
as a blunger spreading the grit.
© by WilTec Wildanger Technik GmbH
Item 50133–50143
Page 8
http://www.WilTec.de
http://www.aoyue.eu
09
2021-1
http://www.teichtip.de
Advertisement
