Advertisement
Picture of the complete spreader
Use of the spreader
•
Fill the hopper. However, do not fill it when being on the lawn; inadvertent spillage of the grit
might be harmful to the lawn or other plants.
•
Set the spreader in motion and open the feeding clap. The grit is now spread.
•
Make sure that the grit is spread evenly. Ensure that the grit is dry.
•
Close the feeding clap as soon as you stop the spreader.
•
Clean the spreader after every single use. The moving parts in particular require thorough care,
as otherwise the grit cannot be dispensed evenly.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 50133–50143
Page 10
09
2021-1
Advertisement
