Pentax MZ-S Service Manual page 6

1 1 1 1 - - - - 2. Grip 2. Grip（ （ （ （ A150 A150） ） ） ）
2. Grip 2. Grip A150 A150
1) Solder 5 lands on 0-I230.
2） 3 Screws （A182 x2：Size1.7x3.5）
3) A12(Strap hook),1 screw･･･
Apply screw lock at the screw hole.
1 1 1 1 - - - - 3. Back cover assy. 3. Back cover assy. 3. Back cover assy. 3. Back cover assy.（ （ （ （ 0 0 0 0 - - - - A201
1 1 1 1 - - - - 4. Body covering left 4. Body covering left（ （ （ （ A153
4. Body covering left 4. Body covering left
1） A153･A7･･･Set A153 and AF mode SW to the AFS.
2） 1 screw(A184)･･･at the SW side.
1 1 1 1 - - - - 5. Front cover (A10 5. Front cover (A102) 2) 2) 2)
5. Front cover (A10 5. Front cover (A10
1 1 1 1 - - - - 6.Top cover 6.Top cover 6.Top cover（ （ （ （ 0 0 0 0 - - - - A301 6.Top cover A301） ） ） ） A301 A301
1） Solder 7 lands (0-T51)
2） Solder 4 lead wires (0-Q100)
(Viewing from rear side---In order Blue,
Brown, Black, Green)
3） Install A159.
4） Solder 2 lands on connector (T25, 0-T67). Insert Flexi.
horizontally and push in both white parts of it.
5） Solder red lead wire
(No.21 Sync. terminal side)
6） Install O-A301.
-1）Arranging lead wire and adhere PT(28x60)→
-2）6 screws(A61=1.7x13, A181=4.7x2.5, A187x3=1.7x5.5)
-3）Adhere A151(Grip rubber) very securely.
1 1 1 1 - - - - 7.Install tempor 7.Install temporally Bottom cover ally Bottom cover
7.Install tempor 7.Install tempor ally Bottom cover ally Bottom cover
and Battery cover and Battery cover and Battery cover and Battery cover
for checking and adjustment. for checking and adjustment. for checking and adjustment. for checking and adjustment.
A201） ） ） ） A201 A201
A153） ） ） ）
A153 A153
27640 -5/34-
0-I230