Map Data Installation; Using Map Install To Download Map Data; Using Mapsource ® To Download Map Data - Garmin Que Application Manual

M D
AP ATA

Using Map Install to Download Map Data

Map Install allows you to download detailed mapping data
to the Palm OS handheld or a Secure Digital Card. When
detailed maps are installed, Que applications, like QueFind, can
provide a broader range of information about the geographic
area in which you are navigating. If you do not install detailed
mapping data, you will only have access to the information
contained in your Que Application's basemap.
To download maps:
1. You must have first installed the Detailed Map Data
Disks on your PC. Refer to the Que for Palm OS
Setup Guide.
2. From your PC Desktop click the Map Install icon to
open the Map Install application.
3. Read the information on the 'Welcome' window. It
will help to determine your next step. For certain
maps (like those provided with your new unit) you
must use an Unlock Code to open the map data.
You may have already entered the Unlock Code
during the setup process and you can move to the
next InstallWizard page.
If not, use the sheet of paper packaged with
your GPS unit that contains the code. Click the
appropriate Unlock Code button to open the dialog
box and follow instructions on each page that
follows.
4. When finished with the UnlockWizard a "Select
Device" window appears. Select the desired device
for receiving downloaded map data (Que with your
Palm OS device "username" attached) and the map
data storage location from the drop down list, then
press 'Next' to move to the map selection window.
5. In the map selection window, select a map region
to download to your unit. Use the map selection
tool to click on the map areas that you want.
6. Click Next to move to the 'Finish' window.
A "Sending to iQue" window displays and
automatically closes when the map data has been
sent.
The next time you perform a HotSync® operation, the map data
will be moved to the Mobile Device Storage or Secure Digital
Card.
19
I
NSTALLATION
Unlock Code Dialog
Sendiing Maps
Using MapSource
®
If you own or intend to purchase additional Garmin MapSource
products (other than those provided with your Palm OS
handheld), you may need an unlock code to install some
of these additional MapSource products. Follow unlock
instructions provided in the Garmin Que for Palm OS Setup
Guide.
The MapSource operating software (version 5.4 and above)
can be used to download maps to the PDA internal storage or a
Secure Digital Card. When using the "Save To Device" feature
on MapSource download maps, select the 'Que' option to
display the 'Save To Que' dialog window. In the 'Que Settings'
portion of this window, select a Location of either 'Internal
Storage' or 'Secure Digital (SD) Card' and then click Send.
Note: The next time you perform a HotSync® operation the
map data from either type of download is transferred to the
Palm OS handheld.
When downloading maps, be certain to check the amount of
free space available on the card to be certain there is sufficient
space for the new maps. Open the Card Info application to view
the available space information.
MapSource map selection window
'Save from and to
Device' buttons
M D I
AP ATA NSTALLATION
Install Maps on Device
to Download Map Data
'Send to Que' dialog box
Que for Palm OS - Applications Guide
>