Using The Quemap Application Selector Icons; Using The Quemap Que Menu - Garmin Que Application Manual

Using the QueMap Application Selector Icons

With QueMap displayed, tap the desired selector to activate the
feature as described below:
Tap the Display Format icon on the map toolbar toggle
between the three options of displaying and hiding the
navigation data fields.
Tap the Waypoint Flag on the map toolbar to display
the 'Mark Waypoint' entry window for your current
location (Position Arrow) or a 'New Waypoint' entry
window for the Map Pointer. The window displays with
a name describing the location if identified as an item in
the map data or as Waypoint 1, 2, 3, etc.
Tap the Information icon to display information about
a location identified by the Map Pointer on the Map
Page. When tapped, an information window displays
describing the location if identified as an item in the
map data or position coordinates (i.e. lat/lon).
Tap the Position Arrow icon (vehicle pointer) to center
the map on your current location when in North Up
mode. When in Track Up mode, the map is centered
horizontally on your location.
Tap the Pan Map icon to allow the stylus to drag
the map and to mark map items with the map pointer
(Panning Arrow).
Place the stylus anywhere on the map and then move the
stylus. The map moves with the stylus and exposes the
part of the map previously out of view. Lift the stylus to
stop panning. To recenter your location on the map, tap
the Position Arrow icon.
Tap the View Area icon to allow you to define an area
on the map with the stylus that will be enlarged when
you lift the stylus from the screen.
Select a point adjacent to the area you want to enlarge
and then drag the stylus to create a box around the area.
Lift the stylus to complete, allowing the map to redraw.
When the View Area Selector is active the Pan Map
feature is not usable.
Tap the Map Scale icon to display the list of map scales.
Drag the arrow to scroll through the entire list of scales.
Tap the scale you want and the map will display at that
scale.
Que for Palm OS - Applications Guide
Full Map only
Map with Data Fields showing only

Using the QueMap Que Menu

With QueMap active, tap the Menu icon to display the Que
Menu.
To create a route to a map point:
Use the stylus to identify a point on the map, then tap
Route To.
To measure the distance between two points on the
map:
1. Open the Que Menu and tap Measure Distance
to view the Measure Distance Page.
2. To measure from your current location to a point on
the map, use the stylus to tap that point. A dotted
line connects the two
points and the distance
displays below.
3. Tap the Map Pin icon to
connect two points other
than your location.
O
VERVIEW
Map with Navigation and Data Fields
showing
QueMap Menu
Measure Distance Option
>
5