For more information about navigating with the iQue M4, touch of the QueNav software. For information about using the Windows Mobile on your iQue M4, refer to the iQue M4 Operating Instructions on your Setup DVD- ROM. Table of Contents Tracks ...
Page 3
When installing the iQue M4 in a vehicle, place the unit securely so that it does not interfere with vehicle operating controls or obstruct the driver’s view of the road (see diagram).
Page 4
Drivers in California should not use the suction mount on their windshield or side or rear windows. Garmin does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice.
Open the GPS Antenna To navigate with your iQue M4, open the GPS antenna and acquire satellite signals. To open the GPS antenna: 1. Press down on the antenna release, located on the back of the iQue M4. 2. Gently pull the antenna up until it is parallel to the ground and it clicks into place.
Tip: Touch the screen with your fingernail or the tip of your finger. ➋ Food, Hotels... Touch ➎ Touch the restaurant you want to go to. ➌ Food & Drink. Touch ➏ Touch iQue M4 Quick Reference Guide...
If you go off route If you stray from the route shown on the map, the iQue M4 recalculates and gives new route instructions. iQue M4 Quick Reference Guide . Then touch Stop. . Or, press and hold the Arrival Time Touch Speed...
➍ Enter the street name and select a street. ➋ Touch Spell City. Enter a city name. ➎ If necessary, touch the correct address. ➌ Enter the number of the address. Touch Next. ➏ Touch iQue M4 Quick Reference Guide...
➊ Touch Where to? > Near. Near Current Location—your iQue M4 automatically uses this option. Near Current Road/Route—finds places near the road or route you are currently following. Near Route Destination—finds places near the destination of the route you are currently following.
Find by Spelling ➊ Touch Where to? > Food, Hotels... You can also find by spelling in any search category. ➊ Touch Spell. ➋ Touch Spell Name. ➋ Enter the place name. iQue M4 Quick Reference Guide...
Find Contacts You can assign a point on the map for any contact in your iQue M4 and create a route to the contact. ➊ Touch Where to? > Contacts. ➍ Select the contact’s address. iQue M4 Quick Reference Guide ➋...
Edit Contacts From the main page, touch ➊ Touch the contact you want to edit. View Recent Finds Your iQue M4 stores a list of the last 40 places you have recently searched for. ➊ Touch Where to? > Recent Finds.
Search for a place as described previously. Then touch Options. Save Your Current Location To save your current location in My Locations, touch touch Save. iQue M4 Quick Reference Guide ➋ Touch Save to My Locations. Then touch OK. Tools >...
To change the name of a saved place or its symbol, touch > Locations. ➊ Touch the Location you want to edit. Where to? > Locations. Tools ➋ Select an option. To delete the Location, touch Delete. iQue M4 Quick Reference Guide > Manage My Data...
Where to? > Home. To change your Home Location, delete Home from My Locations (see previous page). Then follow the steps to set a new Home Location. iQue M4 Quick Reference Guide ➋ Select an option. OUTES Where to? >...
If you need to take a detour from your current route, select page. The unit calculates a new route and provides you with new instructions. The iQue M4 attempts to get you back on your original route as soon as possible. ➊...
You can add extra stops, called via points, to your route. Enter the places you want to go, and the iQue M4 can determine the most logical order for your stops. You must have an active route to add a via point.
Page 18
➊ Touch Sort to arrange the points automatically. ➋ Tap a via point in the list to move it. ➌ Touch the arrows to move the point up or down. To delete it, touch Delete. iQue M4 Quick Reference Guide...
Save a Route You can save the route you are currently navigating and use it again later. ➊ Touch Tools > Manage My Data > Routes. iQue M4 Quick Reference Guide ➋ Touch Save Active Route. OUTES ➌ Touch OK.
OUTES Open a Saved Route ➊ Tools Touch > Manage My Data > Routes. ➌ Touch the route you want to use. ➋ View Touch Routes. ➍ Touch iQue M4 Quick Reference Guide...
Edit a Saved Route ➊ Tools Touch > Manage My Data > Routes. ➍ Touch Edit. iQue M4 Quick Reference Guide ➋ View Touch Routes. ➎ Touch an option and make changes. OUTES ➌ Touch the route you want to edit.
Select intermediate (via) points as necessary. ➋ Select an option. Then select your starting point. ➎ Select your preference. Tools > Manage My ➌ Select an option. Then select your ending point. ➏ Touch Save. iQue M4 Quick Reference Guide...
➊ Touch Tools > Manage My Data > Tracks. After you record tracks, you can save them and view them on the map. iQue M4 Quick Reference Guide ➋ Touch Options. RACKS ➌ Touch Recording Mode and select a...
After you save a track, it appears on the map automatically. After you save a track, we recommend that you clear the track memory by touching ➋ Touch Save Active Track. ➌ Touch Save. Clear Active Track. iQue M4 Quick Reference Guide...
Tools Manage Touch > My Data > Tracks. ➍ To edit the selected track, touch Edit. iQue M4 Quick Reference Guide ➋ View Saved Touch ➎ Touch an option and make changes, or touch Delete to delete the track. RACKS ➌...
Select the starting point and ending point of the road or area you want to avoid. Your iQue avoids using the road or area in a route unless there is no alternative. ➋ Touch Custom. ➌ Select an option. iQue M4 Quick Reference Guide...
Touch Settings > Routing > Avoidance Setup. ➍ Touch the opposite corner of the area you want to avoid. Touch Next. iQue M4 Quick Reference Guide ➋ Touch Custom > Add New Area. ➎ Touch OK. VOIDS ➌ Touch a corner of...
Touch the ending point of the road you want to avoid, then touch Next. ➋ Touch Custom > Add New Road. ➎ Touch OK. ➌ Touch the starting point of the road you want to avoid, then touch Next. iQue M4 Quick Reference Guide...
Touch anywhere on the map. An arrow appears. Touch to view information about that point. Zoom in Zoom out Re-centers map on you . Touch Tools > Browse Area zoom Measure distance Information iQue M4 Quick Reference Guide...
Computer. Where Am I? To view the Where Am I? page, touch Tools > Where Am I? iQue M4 Quick Reference Guide Change Settings From the main page, touch Settings. Arrival Settings > Map Change map orientation and other map settings.
Contact Garmin If you encounter any difficulty while using your iQue M4, or if you have any questions, in the U.S.A. contact Garmin Product Support at 913/397.8200 or 800/800.1020, Monday–Friday, 8 AM–5 PM Central Time;...
PPENDIX Limited Warranty This Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Garmin will at its sole option repair or replace any components that fail in normal use.
Page 35
Distributor warranties are only valid in the area of intended distribution. Units purchased in the United States or Canada must be returned to the Garmin service center in the United Kingdom, the United States, Canada, or Taiwan for service. Products...
Need help?
Do you have a question about the iQue M4 and is the answer not in the manual?
Questions and answers