Activate/Deactivate Time Alarm - La Crosse Technology 512-811-BBB Quick Setup Manual

Celsius/Fahrenheit
Clock: Hold the °C/°F button to switch from Fahrenheit
to Celsius temperature display.
Outdoor Sensor: Remove the battery cover then press
and release the °C/°F button on the transmitter to
select Fahrenheit or Celsius shown on the transmitter.
Set Time Alarm
1. Hold the AL button to enter alarm set mode.
The letters "AL" will replace the weekday.
2. Press the + or -buttons to adjust the values.
3. Press the AL button to confirm & move to the next item.
Alarm Time setting order: 1. Hours, 2. Minutes

Activate/Deactivate Time Alarm

Press the AL button once to view alarm time.
•
Press the + or -buttons to activate the alarm.
•
Once activated, the alarm icon appears.
Press the + or - buttons again to deactivate the
•
alarm. The alarm icon will disappear.
Snooze (Silences Alarm Temporarily)
When alarm sounds, press the ZZ button to silence the
•
alarm for 5 minutes.
The alarm icon will flash.
•
In snooze mode, press the AL button to stop the alarm for
•
one day.
Note: The alarm is crescendo sound. The alarm sounds for
Two minutes and then shut off completely.
WWVB Time Signal Search
Hold the + button to start or stop a manual signal search. WWVB
Icon will flash
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
Model: 512-811-BBB www.lacrossetechnology.com/support
Alarm
Icon
| 3