5. Installation
1. CONNECT THE DEVICE CLAMP CONNECTORS
TERMINALS TO THE BATTERY
The Red terminal to the positive battery pole and
black terminal to the positive battery pole.
Switching the connection polarity on the battery
poles will stop the charge and
light up the error led!
2. CONNECT
SOCKET.
3. IF POWER INDICATOR LED IS ON,
SMARTCHARGER
4. SET THE CORRECT CHARGING CURVE PRESSING
THE MODE BUTTON
The Charging curve depends on battery technology
and specifications.
See the curve description at Page 9.
MODE
LITHIUM
LiFePO
AGM
4
SMARTCHARGER
IS READY TO CHARGE.
SMARTCHARGER
SMARTCHARGER
TO AC POWER
5
will