Miboxer WL5 Quick Start Manual

0304-1
Subordinate New Brand
WiFi 5 in 1 LED Strip Controller
Model No.: WL5
Please read the instructions carefully
before using the controller.

1. Features

The controller is adopted by the most advanced PWM control
technology, and has memory function(The light status will keep
same as the status before you turn off the light); Wireless and
4G controlled by MiBoxer APP.
Support amazon alexa and WiFi
google assistant control Wireless Control
WiFi
Smartphone Compatible with 2.4GHz
App Control
RF Remote Controller
RGB colors to Dimmable
choose Saturation control
Color temperature Timing ON/OFF
2700~6500K the lights
Group Control 16 Color Changing
randomly by APP modes

2. Parameters

Model No.: WL5
Input Voltage: DC12V~24V ( 5.5*2.1mm)
Output: 6A/Channel ( Total Output Max.15A )
Working Temperature: -20~60℃
Communication Mode: WiFi-IEEE 802.11b/g/n 2.4GHz
RF: 2.4GHz Weight: 65g
Subordinate New Brand
Scan to install APP
Input 1 WiFi 5 in 1 LED Strip Controller
Model No.: WL5
Input Voltage: DC12V~24V ( 5.5*2.1mm)
Output: 6A/Channel (Total output Max.15A)
Working Temperature: -20~60°C
Communication Mode: WiFi-IEEE 802.11b/g/n 2.4GHz
RF: 2.4GHz
Input 2
Indicator light SET
Made in China
Support amazon alexa and
google assistant control
2.4GHz
124mm
SET Button: Long press "SET" for 3 seconds; When red indicating
light blink quickly, device reset and go into Smart Link mode.
Switching Output Mode: Short press "SET" button to switch the
output mode; The indicating lamp flickering means switching
successfully; Different colors flickering correspond to different
output mode; Details see below sheet.
White Light Y ellow Light Red Light Green Light Blue Light
Flickering Flickering Flickering Flickering Flickering
Single Color Dual White RGB RGBW RGB+CCT
Mode Mode Mode Mode Mode
Indicating light instruction:
Red light Red light Green light Green light Y ellow light
always-on blinking
always-on blinking blinking
Disconnected Smart Link Networking Received Device
from network mode successfully signal malfunction

3. Auto-synchronization function

Different controllers can work synchronously when they are
started at different times, controlled by the same remote, under
same dynamic mode and with same speed.
Controller
Controller Controller
Controller
Remark:
1. Indicating Auto-transmitting.
2. Controller will be auto-synchronizing in the same
dynamic modes and within 30m controlling distance.