MiBoxer Mi Light FUT035SA, FUT036SA - LED Controller Kits Manual

Table of Contents

Contents

1 Introduction
2 Button Diagram
3 Model No.: FUT035SA
- 3.1 LED Controller
- 3.2 Sunrise Remote
4 Model No.: FUT036SA
- 4.1 LED Controller
- 4.2 Sunrise Remote
5 Install The Battery For Remote
6 Remote Instruction
7 Linking Code / Unlinking Code Instructions
8 Signal transmitting
9 PWM high frequency / low frequency switching
10 Attention
11 Documents / Resources
- 11.1 Download manual

Introduction

Controller adopt the widely used 2.4GHz wireless technology with the features of low power consumption, long signal transmitting and strong anti-interference, etc. Controller has auto-transmitting function. Widely used on the controlling of hotel lighting and home lighting.
Dimensions

Button Diagram

Button Diagram
Touch ring: brightness, color temperature, use together. (It turns to adjust brightness by default if remote is not operated for 3 seconds)

Dual White LED Controller Kits

Model No.: FUT035SA

LED Controller

Working Voltage: DC12V~24V
Output: 12A/Channel
Total Output: Max 12A
RF: 2.4GHz
Control Distance: 30m
Working Temperature: -10~40°C
Output Connection: Common anode

Sunrise Remote

Working Voltage: 3V(AAA*2PCS)
Transmitting Power: 6dBm
Standby Power: 20uA
RF: 2.4GHz
Modulation Method: GFSK

Color temperature adjustable
Dim brightness
2.4G RF wireless transmission technology
Remote control Control distance 30m
Smartphone APP control (2.4GHz gateway is needed)
Support third party voice control (2.4GHz gateway is needed)

FUT035SA - Connection Diagram

Single Color LED Controller Kits

Model No.: FUT036SA

LED Controller

Working Voltage: DC12V~24V
Output: Max 12A
RF: 2.4GHz
Control Distance: 30m
Working Temperature: -10~40°C
Output Connection: Common anode

Sunrise Remote

Working Voltage: 3V(AAA*2PCS)
Transmitting Power: 6dBm Standby Power: 20uA
RF: 2.4GHz
Modulation Method: GFSK

Dim brightness
2.4G RF wireless transmission technology
Remote control Control distance 30m
Smartphone APP control (2.4GHz gateway is needed)
Support third party voice control (2.4GHz gateway is needed)

FUT036SA - Connection Diagram

Install The Battery For Remote

Note: 2*AAA Battery need to buy seperately

Open battery cover behind remote.
Install battery correctly and close battery cover.

Remote Instruction

Adjust color temperature
Short press key once, then touch to adjust color temp.
Adjust brightness
Short press key once, then touch to adjust brightness

Linking Code / Unlinking Code Instructions

warning Attention: No need to match code since its already matched code in factory setting

Linking Code Instructions

Switch off controller, after 10 seconds then switch on again.
Short press "ON" button 3 times within 3 seconds when light on.
Lights blink 3 times slowly means linking is done successfully.

danger Linking failed if light is not blinking slowly, Please follow above steps again.(Note: controller that have linked can't link again)

Unlinking Code Instructions

Switch off controller, after 10 seconds then switch on again.
Short press "ON" button 5 times within 3 seconds when light on.
Lights blink 10 times quickly means unlinking is done successfully.

danger Unlinking failed if light is not blinking quickly, Please follow above steps again.(Note: controller haven't linked that don't need to unlink)

Signal transmitting

One controller can transmit the signals from the remote control to another controller within 30m, as long as there is a controller within 30m, the remote control distance can be limitless.
Signal transmitting

PWM high frequency / low frequency switching

Switch to high frequency (8KHz): on the condition of turning on the light

Short press the "OFF" button of the remote control once;
Short press the "ON" button 5 times within 3 seconds, the white light blink 2 times quickly, indicating successfully.

Switch to low frequency (500Hz): on the condition of turning off the light

Short press the "ON" button of the remote control once;
Short press the "OFF" button 5 times within 3 seconds, the white light blink 2 times slowly, indicating successfully.

Attention

Please check whether the voltage of the power supply is in accordance with the controller, and please check the connection of both the cathode and anode, otherwise the controller will be broken.
Please don't connect wires with power on. Please turn on again only when it is in right connection and no short circuit.
Please do not use the controller in the place with widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected.

Controller can not use in humid area
Made in China