Control Panel - Smeg Universale C4173N1F User Manual

28

CONTROL PANEL

2 1 2 1
1. Fridge temperature indicator LED
2. Freezer temperature indicator LED
3. FastFreeze indicator
4. Fridge compartment indicator
5. Freezer compartment indicator
6. ON/OFF button
Compartment selection button
7. FastFreeze button
Temperature regulator
Switching on
1. Insert the plug into the wall socket.
2. Touch the ON/OFF button (6) if all
LED indicators are off.
Switching off
Keep touching the ON/OFF button (6) for
3 seconds.
All indicators light off.
Temperature regulation
Before regulating the temperature, it is
necessary to select the compartment
(fridge or freezer).
The upper or lower cavity is selected by
the compartment selection button (6).
To select the freezer compartment touch
the compartment selection button (6) until
LED corresponding to the lower cavity
lights up.
2 3 2 4 5 2
7 4 6 3
The temperature LED indicator shows the
latest set temperature. Recommended
setting is -18°C.
To select the fridge compartment touch
the compartment selection button (6) until
LED corresponding to the upper cavity
lights up.
The temperature LED indicator shows the
latest set temperature. Recommended
setting is +4°C.
To set temperature:
1. Touch temperature regulator button
(7).
Current temperature indicator blinks.
2. Any time you touch the temperature
regulator button (7), the setting moves
by one position. When you select a
temperature, the LED corresponding to
selected temperature value blinks for a
while and the setting is fixed.
The set temperature will be
reached within 24 hours. After
a power failure the set
temperature remains stored.
FastFreeze function
The FastFreeze function is used to
perform pre-freezing and fast freezing in
sequence in the freezer compartment.
This function accelerates the freezing of
fresh food and, at the same time, protects
food products already stored in the freezer
compartment from undesirable warming.
To freeze fresh food activate
the FastFreeze function at least
24 hours before placing the
food to complete pre-freezing.
To activate FastFreeze function press the
FastFreeze button (7) for 3 seconds. The
FastFreeze indicator switches on.
This function stops
automatically after 52 hours.
It is possible to deactivate the function at
any time by pressing FastFreeze button