Viessmann VITODENS 200-W Service Instructions Manual page 49

Code 2
(cont.)
Coding in the delivered condition
60:20 During DHW heating, the
boiler water temperature
is max. 20 K higher than
the set DHW tempera-
ture
62:2 Circulation pump with
2 min run-on time after
cylinder heating
63:0 Without auxiliary function
for DHW heating (only for
constant temperature
control units)
67:40 With Vitosolic: Third set
DHW temperature =
40 °C
6F:... Maximum output for
DHW heating in %,
defaulted by the boiler
coding card
71:0 DHW circulation pump:
"ON" in accordance with
the time program (only for
weather-compensated
control units)
72:0 DHW circulation pump:
"ON" in accordance with
the time program (only for
weather-compensated
control units)
73:0 DHW circulation pump:
"ON" in accordance with
the time program (only for
weather-compensated
control units)
Possible change
60:5 The difference between the
to boiler water temperature
60:25 and the set DHW tempera-
ture is adjustable from 5 to
25 K
62:0 Circulation pump without
run-on
62:1 Run-on time adjustable
to from 1 to 15 min
62:15
63:1 Auxiliary function: 1 x daily
63:2 Every 2 days to every 14
to days
63:14
63:15 2 x daily
67:0 Without third set DHW tem-
perature
67:1 Third set DHW tempera-
to ture adjustable from 1 to
60 °C (subject to the setting
67:60
of coding address "56")
6F:0 Max. output during DHW
to heating adjustable from 0
6F:100 to 100 %
71:1 "Off" during DHW heating
to the first set value
71:2 "On" during DHW heating
to the first set value
72:1 "Off" during DHW heating
to the second set value
72:2 "On" during DHW heating
to the second set value
73:1 During the time program
to "ON" 1x/hour for 5 min
73:6 "ON" up to 6x/hour for
5 min
73:7 permanently "ON"
Codes
49