Satellite Search Status; Gps Date And Time Page; Gps Normal Reset Page - Garmin Apollo SL50 User Manual

SV31 DATA el:210 sig:055 az:0430

Satellite Search Status

—
SRCH
Receiver is searching for the satellite
—
ACQR
receiver is acquiring the signal
—
TRCK
receiver has locked to the satellite's data sequence
—
DATA
receiver is locked and downloading data from the
satellite
Until data is received by the receiver, a display may
look like the following:
Third Sat

GPS Date and Time Page

In the GPS Sensor Information function, turn the
Small knob to view the GPS Date and Time page.
GPS Time(UTC) 13 May 96 17:54:27

GPS Normal Reset Page

Resetting the GPS receiver deletes all GPS
information and forces a new search of the
satellites. Use this function when it appears that the
GPS receiver is locked up or seems to be taking far
longer than it should to lock onto the signals.
1. In the GPS Sensor Information function, turn the
Small knob to view the GPS Normal Reset page.
Press ENT to do Normal GPS Reset
2. Press ENT to reset the GPS receiver.
ENT
System Functions
Not Available
81