Using The Direct-To Function - Garmin Apollo SL50 User Manual

Using the Direct-To Function

1. Press the Direct-To key. Change the waypoint
D
type by moving to the character to the left of the
waypoint name with the Large knob.
vUBG
2. Change the type of destination waypoint by
turning the Small knob to select: airport (a), NDB
(n), VOR (v), INT (i), or USER (u). For instance,
with ARPT (a) indicated as the type of
destination waypoint, only airports show on the
display as you select identifier characters.
aSLE
3. Turn the Large knob to each character of the
waypoint identifier. Change the character with
the Small knob.
aPAE
4. Turn the Large knob to the "c" or "f" character
before the waypoint city (c) or facility (f) name.
Change the character with the Small knob. A
plus (+) will appear when the same name is
available for multiple waypoints.
aPDX +c PORTLAND
5. You can also then turn the Large knob to each
character of the city/facility name. Change the
character with the Small knob.
aPDX +c PORTLAND
f NEWBERG
c Salem
c EVERETT
Getting Started the First Time
OR USA
OR USA
WA USA
OR USA
OR USA
15