Adjusting The Volume - Garmin Mobile 20 Set Up And Go Manual

GPS 20SM LED Status Indicators
The blue LED indicates the GPS Bluetooth connection.
The green LED indicates the hands-free connection.
Blue Bluetooth GPS LED Status
• Blue flashing: making GPS Bluetooth connection
• Blue steady on: GPS Bluetooth connection made
• Blue and green steady on: GPS and hands-free
connection made (not supported by all phones)
Green Bluetooth Hands-free LED Status
• Green steady on: hands-free connection made
• Green rapid flashing: incoming call
Green flashing: call in progress
•
GPS 20SM Beep Meanings
• High short beep: hands-free connection made
between GPS 20SM and phone
• Low short double-beep: hands-free connection
ended between GPS 20SM and phone

Adjusting the Volume

Press the wheel on the right side of the phone mount
uP to raise volume or DOWN to lower. Press and
hold uP or DOWN to quickly adjust the volume.
Garmin Mobile™ 20 set up and go!
Using the Hands-free Wheel
Press the wheel on the right side of the phone mount
IN to perform hands-free operations:
Quickly Press to...
Not
connect to the
Connected previously paired
phone
Connected use voice dial (if
supported by your
phone)
In a Call hang up the call
Incoming answer an incoming
Call call
NOte: You may have to adjust the earpiece volume
on your phone to maximize the audio output of the
GPS 20SM. See your phone's documentation.
Press and Hold to...
dial the last number
dialed
transfer the call to your
phone so you can walk
away from the GPS
20SM while on a call
reject an incoming call
(On most phones and
plans, rejecting the call
sends it to your voice
mail.)