9.1 Startup Procedure
9.2.3 Startup Flow
This section describes how to set up the remote I/O module using V-Tool to start up the
system. Figure 9-1 shows a flow of building a new integrated controller.
System registration
(Off-line work using V-Tool)
Prepare the remote I/ O module.
(Operations using the FL654)
Download
(Task performed with V-Tool connected to the FL654)
Start up the module
9
(Operation using FL654)
Figure 9-7 Startup Procedure if the Remote I/O Module is set up Using V-Tool
49
6F8C1120