Master Station Setup Procedure - Toshiba V Series User Manual

Chapter 9 Startup Using V-Tool
9.3 Master Station Startup Procedure
The following procedure is necessary on the FL612 side besides download to FL654.
(1) Talker block is registered on "Scanning memory folder" of "FL-net LAN".
Talker block of FL612 is set to the place of FL-net common memory area allocated in
FL654 subordinate's output module.
In this sample, it registers thoroughly to talker block of dummy station for remote I/O
station of "FL-net ControlLAN".
Talker block of dummy station for master station is set to include talker area of remote
I/O station.
In this sample, the transmission block is done as well as "Transmission area of FL654".
9
62
The talker block of the dummy station for the master station and the talker block of
FL612 are registered respectively.
Talker block of dummy station for master station
Talker block of FL612
Model 2000 FL-net (OPCN-2) Remote I/O Station Module (FL654) User's Manual