DeWalt DW168F Manual page 5

applICaTIon
MoDEl
TypE
Max. hoRsEpoWER*
ToTal DIsplaCEMEnT
BoRE anD sTRokE
RaTED spEED
Max no loaD spEED
IDlE spEED
DRy WEIGhT
DIMEnsIons (l x W x h) In (mm)
MounTInG FlanGE
CoMpREssIon RaTIo
IGnITIon sysTEM
spaRk pluG
CaRBuREToR
aIR ClEanER
luBRICaTInG sysTEM
oIl CapaCITy
sTaRTInG sysTEM
sToppInG sysTEM
FuEl usED
FuEl Tank CapaCITy
p.T.o. shaFT RoTaTIon
CRankshaFT pTo
GoVERnoR
FuEl lInE
FUEL FILTER
on/oFF sWITCh
* Gross horsepower (HP). This horsepower rating represents the maximum output under laboratory conditions at 3600 RPM in accordance with SAE (Society of Automotive Engineers)
J1995 and should be used for comparison purposes only. Actual engine output will be lower and will vary depending on the application, speed and other variables including altitude
and temperature.
pREssuRE WashERs
DW168F-2h
6.5 hp
196 cc
68 x 54 mm
3400 rpm
3700 rpm
no idle control
37.5 lbs. (17 kg)
15.7 x 13.0 x 13.4 (400 x 330 x 340)
flange A per SAE J609a
8.5 to 1
Transistorized magneto Ignition
NGK (BP6ES, BPR6ES)
float type, adjustable idle speed
Standard Semi-dry (foam+paper), high
mount
Splash
0.55 qt. (520 mL)
Recoil, 10 o'clock position
Ignition primary circuit ground
0.95 gal (3.6 L)
Counterclockwise (from P.T.O. side)
Ext. #3 per SAE J609a (3/4" key way PTO) Ext. #4 per SAE J609a (1" key way PTO)
Equipped on recoil base
DW177F-h
Single Cylinder, 4 Stroke, OHV, Spark Ignition, Air Cooled
9 hp
270 cc
77 x 58 mm
3400 rpm
3700 rpm
2750 rpm
57.3 lbs. (26 kg)
16.9 x 15.6 x 16.1 (430 x 395 x 410)
flange b per SAE J609a
8.2 to 1
Transistorized magneto Ignition
NGK (BP6ES, BPR6ES)
float type, adjustable idle speed
Standard Semi-dry (foam+paper), high mount
Splash
1.06 qt (1000 mL)
Recoil, 10 o'clock position
Ignition primary circuit ground
Regular gasoline (86 octane, up to 10% ethanol)
1.56 gal (5.9 L)
Counterclockwise (from P.T.O. side)
mechanical, centrifugal flyweight type, variable speed
Low permeation, per SAE J1737 at 40º C or higher
In gas tank only
Equipped on recoil base
5
DW188F-h
13 hp
389 cc
88 x 64 mm
3600 rpm
3800 rpm
2750 rpm
70.5 lbs. (32 kg)
18.7 x 17.3 x 17.1 (475 x 440 x 435)
flange b per SAE J609a
8.2 to 1
Transistorized magneto Ignition
NGK (BP6ES, BPR6ES)
float type, adjustable idle speed
Standard Semi-dry (foam+paper), high mount
Splash
1.11 qt (1100 mL)
Recoil, 10 o'clock position/Electric start
Ignition primary circuit ground
1.93 gal (7.3 L)
Counterclockwise (from P.T.O. side)
Ext. #4 per SAE J609a (1" key way PTO)
Equipped on recoil base