Operation Of The Control System - Graf ONE2CLEAN Manual

OPERATION OF THE CONTROL SYSTEM

4
4. Operation of the Control System
The operation of the system is carried out via a microprocessor in the control unit. The microprocessor
4. Operation of the Control System
Operation of the Control System
4. Operation of the Control System
allows for the set-up of operating parameters, the display of operating conditions and the query of system
The operation of the system is carried out via a microprocessor in the control unit. The microprocessor
peration of the system is carried out via a microprocessor in the control unit. The microprocessor
parameters as well as the programming of working times through a specialist company.
The operation of the system is carried out via a microprocessor in the control unit. The microprocessor
allows for the set-up of operating parameters, the display of operating conditions and the query of system The operation of the system is carried out via a microprocessor in the control unit. The microprocessor allows for the
for the set-up of operating parameters, the display of operating conditions and the query of system
Adjustments are made by scrolling through numerical values using the two arrow keys
set-up of operating parameters, the display of operating conditions and the query of system parameters as well as the
allows for the set-up of operating parameters, the display of operating conditions and the query of system
parameters as well as the programming of working times through a specialist company.
meters as well as the programming of working times through a specialist company.
programming of working times through a specialist company.
parameters as well as the programming of working times through a specialist company.
ings are then confirmed by pressing the
Adjustments are made by scrolling through numerical values using the two arrow keys
ments are made by scrolling through numerical values using the two arrow keys
Adjustments are made by scrolling through numerical values using the two arrow keys
Adjustments are made by scrolling through numerical values using the two arrow keys
The individual dialogues can be terminated ahead of time by pressing
confirmed by pressing the
tings are then confirmed by pressing the
are then confirmed by pressing the
cally after 2 minutes.
tings are then confirmed by pressing the
The individual dialogues can be terminated ahead of time by pressing
The individual dialogues can be terminated ahead of time by pressing
ndividual dialogues can be terminated ahead of time by pressing
The control system is broken down into the following display pages:
2 minutes.
The individual dialogues can be terminated ahead of time by pressing
cally after 2 minutes.
after 2 minutes.
cally after 2 minutes.
4. Basic level: Status of the cycle sequence with the elapsing remaining time, as well as the display of
The control system is broken down into the following display pages:
The control system is broken down into the following display pages:
ontrol system is broken down into the following display pages:
The control system is broken down into the following display pages:
error messages.
4. Basic level: Status of the cycle sequence with the elapsing remaining time, as well as the display of error messages.
4. Basic level: Status of the cycle sequence with the elapsing remaining time, as well as the display of
asic level: Status of the cycle sequence with the elapsing remaining time, as well as the display of
5. Operator level: The operator can access the operator level by pressing the
4. Basic level: Status of the cycle sequence with the elapsing remaining time, as well as the display of
error messages.
ror messages. ator-specific settings.
5. Operator level: The operator can access the operator level by pressing
error messages.
settings.
5. Operator level: The operator can access the operator level by pressing the
6. Service level: A password-protected service level can be accessed from the operator level using an
perator level: The operator can access the operator level by pressing the
5. Operator level: The operator can access the operator level by pressing the
ator-specific settings.
additional code. This level is reserved for trained personnel. Here adjustments or changes can be
or-specific settings.
6. Service level: A password-protected service level can be accessed from the operator level using an additional code.
ator-specific settings.
6. Service level: A password-protected service level can be accessed from the operator level using an
made and diagnostic data is retrieved.
ervice level: A password-protected service level can be accessed from the operator level using an
This level is reserved for trained personnel. Here adjustments or changes can be made and diagnostic data is retrieved.
6. Service level: A password-protected service level can be accessed from the operator level using an
additional code. This level is reserved for trained personnel. Here adjustments or changes can be
dditional code. This level is reserved for trained personnel. Here adjustments or changes can be
additional code. This level is reserved for trained personnel. Here adjustments or changes can be
made and diagnostic data is retrieved.
ade and diagnostic data is retrieved.
made and diagnostic data is retrieved.
Figure 2: View of the operating unit
4.1 Control Programme
4.1 Control Programme
The control system switches the outputs for air compressors and stepper motors on a timer.
The control system switches the outputs for air compressors and stepper motors on a timer.
The timing is determined by the set sequence tables. A complete cleaning cycle is started for each start time in
4.1 Control Programme
The timing is determined by the set sequence tables. A complete cleaning cycle is started for each start
Control Programme
accordance with the selected sequence table.
4.1 Control Programme
The control system switches the outputs for air compressors and stepper motors on a timer.
ontrol system switches the outputs for air compressors and stepper motors on a timer.
ime in accordance with the selected sequence table.
The control system switches the outputs for air compressors and stepper motors on a timer.
By setting up holiday times in the operator level, the complete sequence of cleaning cycles can be suppressed for the set
The timing is determined by the set sequence tables. A complete cleaning cycle is started for each start
ming is determined by the set sequence tables. A complete cleaning cycle is started for each start
By setting up holiday times in the operator level, the complete sequence of cleaning cycles can be sup-
period of time. Only one holiday cycle with greatly reduced activity takes place at this time. During this time, no treated
The timing is determined by the set sequence tables. A complete cleaning cycle is started for each start
time in accordance with the selected sequence table.
n accordance with the selected sequence table.
pressed for the set period of time. Only one holiday cycle with greatly reduced activity takes place at this
wastewater will be removed, as there should be no supply.
time in accordance with the selected sequence table.
By setting up holiday times in the operator level, the complete sequence of cleaning cycles can be sup-
tting up holiday times in the operator level, the complete sequence of cleaning cycles can be sup-
ime. During this time, no treated wastewater will be removed, as there should be no supply.
By setting up holiday times in the operator level, the complete sequence of cleaning cycles can be sup-
pressed for the set period of time. Only one holiday cycle with greatly reduced activity takes place at this
ed for the set period of time. Only one holiday cycle with greatly reduced activity takes place at this
pressed for the set period of time. Only one holiday cycle with greatly reduced activity takes place at this
time. During this time, no treated wastewater will be removed, as there should be no supply.
During this time, no treated wastewater will be removed, as there should be no supply.
time. During this time, no treated wastewater will be removed, as there should be no supply.
4. Operation of the Control System
4. Operation of the Control System
4. Operation of the Control System
4. Operation of the Control System
button.
button.
4. Operation of the Control System
button.
The operation of the system is carried out via a microprocessor in the control unit. The microp
allows for the set-up of operating parameters, the display of operating conditions and the query o
parameters as well as the programming of working times through a specialist company.
Adjustments are made by scrolling through numerical values using the two arrow keys
tings are then confirmed by pressing the
The individual dialogues can be terminated ahead of time by pressing
cally after 2 minutes.
The control system is broken down into the following display pages:
4. Basic level: Status of the cycle sequence with the elapsing remaining time, as well as the d
error messages.
5. Operator level: The operator can access the operator level by pressing the
ator-specific settings.
6. Service level: A password-protected service level can be accessed from the operator level
additional code. This level is reserved for trained personnel. Here adjustments or change
made and diagnostic data is retrieved.
Figure 2: view of the operating unit
Figure 2: view of the operating unit
Figure 2: view of the operating unit
Figure 2: view of the operating unit
4.1 Control Programme
The control system switches the outputs for air compressors and stepper motors on a timer.
The timing is determined by the set sequence tables. A complete cleaning cycle is started for
24 / 57
time in accordance with the selected sequence table.
By setting up holiday times in the operator level, the complete sequence of cleaning cycles ca
24 / 57
pressed for the set period of time. Only one holiday cycle with greatly reduced activity takes pl
time. During this time, no treated wastewater will be removed, as there should be no supply.
4. Operation of the Control System
or will be terminated automati-
button.
button.
or will be terminated automati-
24 / 57
24 / 57
. The set-
. The set-
. The set-
. The settings are then
. The set-
or will be terminated automatically after
or will be terminated automati-
or will be terminated automati-
button and enter oper-
the button and enter operator- specific
button.
button and enter oper-
button and enter oper-
button and enter oper-
Figure 2: view of the operating unit
.
or will be terminated a
button and en
9
Graf UK Ltd