Polaris 340 LX 2007 Service Manual page 212

EDGE 121 Rail Assembly
RAIL TIP
C
SLIDER FASTENER
A = 19 Ft.Lbs.
B = 35 Ft.Lbs.
C = 3 - 6 Ft.Lbs.
Assembly Notes
• Never re-use Nylock nuts fasteners with locking
agent. Always replace with new parts.
• All pivots must rotate freely after tightening
fasteners.
• Apply Polaris Premium All Season Grease to all
grease zerks as outlined in the maintenance table.
CAUTION
Some rail shaft fasteners are pre-coated with locking
agent. Never re-use these fasteners once removed.
Always use new pre-coated fasteners when mounting
the suspension to the tunnel.
FRONT-REAR SCISSOR STOP
A
A
A
SLIDER
= T
9923396 - 2007-2012 EDGE/Widetrak LX Service Manual
©2011 Polaris Sales Inc.
Steering and Suspension Systems
REAR-REAR SCISSOR STOP
B
B
B
IDLER ADJUSTMENT BOLT
CARRIER WHEELS
8.17
8