550 Fan Engine; Blower Housing Assembly - Polaris 340 LX 2007 Service Manual

550 FAN ENGINE

Blower Housing Assembly

UPPER BLOWER HOUSING
BLOWER HOUSING
Disassembly / Assembly Process
1. Clamp recoil rope with a pliers at the engine. Remove
recoil handle from rope, pull the rope through the
console, then tie a knot just above the pliers. Remove
the pliers.
2. Remove the screws that mount the upper and lower
blower housings to the engine.
3. Remove the recoil / fan housing from the engine. The
recoil pulley is located inside the housing.
4. Reference RECOIL PULLEY section for recoil
disassembly / assembly information.
5. The fan / flywheel and stator must be removed to
RECOIL HUB
FRICTION PLATE
FRICTION SPRING
RATCHET SPRING
RECOIL PULLEY
RECOIL SPRING
Fastener
Recoil Hub
Friction Plate /
Recoil Pulley
Recoil / Fan
Housings
9923396 - 2007-2012 EDGE/Widetrak LX Service Manual
©2011 Polaris Sales Inc.
Engine Systems
LOWER BLOWER HOUSING
RATCHET
remove the rear blower housing.
Torque
9 ft.lbs. (12 Nm)
5 ft.lbs. (7 Nm)
5
RECOIL / FAN HOUSING
Note
Secure fasteners
after all covers are
in place and
snapped together.
5.23