Honda HR-V 2018 Manual page 574

■
Replacing the Flat Tyre
Wheel
Nut
1. Remove the wheel nuts and flat tyre.
2. Wipe the mounting surfaces of the wheel
with a clean cloth.
3. Mount the spare tyre.
4. Screw the wheel nuts until they touch the
lips around the mounting holes, and stop
rotating.
5. Lower the vehicle and remove the jack.
Tighten the wheel nuts in the order
indicated in the image. Go around,
tightening the nuts, two to three times in
this order.
Wheel nut torque:
108 N∙m (11 kgf∙m, 80 lbf∙ft)
uuIf a Tyre Goes FlatuChanging a Flat Tyre
1Replacing the Flat Tyre
Do not over tighten the wheel nuts by applying extra
torque using your foot or a pipe.
Continued
*
573