Indicator
Name
Seat Belt
Reminder
Indicator
*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
*2:Models with multi-information display
*3:On the left: Except Philippine, Cambodian, Laotian, Myanmarese and Taiwanese models, On the right: Philippine, Cambodian, Laotian,
Myanmarese and Taiwanese models
*4:Except Australian, New Zealand, African and Middle Eastern models
*5:Australian, New Zealand, African and Middle Eastern models
* Not available on all models
On/Blinking
Comes on and the beeper sounds
●
if you are not wearing a seat belt
when you turn the ignition switch
to ON
*1
.
(
w
Blinks while driving if you have not
●
fastened the seat belt. The beeper
sounds and the indicator blinks at
regular intervals.
Models with front passenger's seat belt
reminder
If the front passenger is not
●
wearing a seat belt, the indicator
comes on about a few seconds
later.
Blinks while driving if the front
●
passenger has not fastened a seat
belt. The beeper sounds and the
indicator blinks at regular intervals.
Explanation
*
The beeper stops and the indicator
●
goes off when you fasten the seat
belt.
Stays on after you have
●
fastened the seat belt - A
detection error may have occurred
in the sensor. Have your vehicle
checked by a dealer.
Models with front passenger's seat belt
reminder
The beeper stops and the indicator
●
goes off when the front passenger
fastens their seat belt.
Stays on after the front
●
passenger has fastened the seat
belt - A detection error may have
occurred in the sensor. Have your
vehicle checked by a dealer.
2 Seat Belt Reminder P. 44
uuIndicatorsu
Message
*2, *3
*4
*5
*4
*5
Continued
103