Light Switches - Honda HR-V 2018 Manual

uuOperating the Switches Around the Steering WheeluLight Switches

Light Switches

■
Manual Operation
High Beams
Flashing the high beams
Turns on position, tail, and rear
licence plate lights
Turns on headlights, position,
tail, and rear licence plate lights
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
200
Rotating the light switch turns the lights on
and off, regardless of the position of the
ignition switch *1
■
High beams
Push the lever forward until you hear a click.
■
Low beams
Low Beams
When in high beams, pull the lever back to
return to low beams.
■
Flashing the high beams
Pull the lever back, and release it.
Malaysian models
Taiwanese models with automatic lighting control
■
Lights off
Turn the lever to OFF either when:
• The shift lever is in
• The parking brake is applied.
To turn the lights on again, turn the lever to
OFF to cancel the lights off mode. Even if you
do not cancel the lights off mode, the lights
come on automatically when:
• The transmission is moved out of
the parking brake is released.
• The vehicle starts to move.
.
P . (
( P and
1Light Switches
Models without keyless access system
If you remove the key from the ignition switch while
the lights are on, a chime sounds when the driver's
door is opened.
Models with keyless access system
If you leave the power mode in VEHICLE OFF (LOCK)
while the lights are on, a chime sounds when the
driver's door is opened.
Models without head light adjust function
If you sense that the level of the headlights is
abnormal, have your vehicle inspected by a dealer.
Do not leave the lights on when the engine is off
because it will cause the battery to discharge.