Table of Contents
Advertisement
Pulse Oximeter
ALERT SOUND SETTINGS
Hold the power-on key/functional key while the
Oximeter is in powered-on state.
Parameter setting interface 1 is displayed.
Move "*" to the corresponding option by pressing
the function key. Hold the function key to set Alm
to on and set Beep to off.
When Alm is set to on and the measured values
of the blood oxygen saturation and pulse rate go
beyond the upper limit or lower limit, the
Oximeter gives off an alert sound.
When Alm is set to off and the measured values
go beyond the limit, the Oximeter will not give
any alert sound.
When Beep is set to on, a tick will be heard along
with pulse beats during pulse rate measurement.
When Beep is set to off, no sound will be output
along with pulse beats during pulse rate
measurement.
While the "*" symbol stays on the Restore option,
hold the function key to restore factory settings.
V1.1
REMOTE CARE PARTNERS
PAGE 7
Advertisement
Table of Contents
