Taking A Measurement - RCP ADF-B06 Instruction Manual

Do not allow other people to use your pulse
oximeter. The pulse oximeter is specifically
assigned to you and you only. Allowing other
people to use your pulse oximeter can mislead
your provider.

TAKING A MEASUREMENT

1. Squeeze the closed end of the device to
open the other end. Stick one finger
completely into the rubber pad cavity of the
Oximeter,
2. Keep the fingernail surface upward and
release the closed end so the device fits
snugly on your finger.
3. Press the power key to power on the
Oximeter. If you do not completely insert your
finger into the cavity, the measurement may
be inaccurate.
The reading will automatically transfer to the
4.
RCP SmartHub and will then be sent to your
provider.
V1.1 REMOTE CARE PARTNERS
Pulse Oximeter
PAGE 10