Table of Contents
Advertisement
SYMBOLS
Symbol
%SpO
2
bpmR
POWER-ON KEY/FUNCTIONAL KEY
OPERATIONS
After powering on the Oximeter, hold the power-
on key/functional key for about one second. The
Oximeter shows a parameter setting interface.
Press or hold the power-on/functional key to
perform corresponding operations. Hold it to set
an item or press it to switch an option or switch
the display mode. Press means no more than 0.5
seconds, while Hold means more than 0.5
seconds.
V1.1
Description
BF-type application part
Caution: Please see this manual.
Symbol of oxygen saturation
Symbol of pulse rate
Bluetooth symbol
When end users abandon this product,
they must send the product to the
collection place
for recycling.
REMOTE CARE PARTNERS
Pulse Oximeter
PAGE 6
Advertisement
Table of Contents
