Related Manuals for Black Box ABC Series
Summary of Contents for Black Box ABC Series
- Page 1 © Copyright 2000. Black Box Corporation. All rights reserved. 1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746...
- Page 2 Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX SUPPORT FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 INFORMATION Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.com...
-
Page 4: Specifications
ETHERNET TRANSCEIVER SWITCHES 1. Specifications Switch—(1) Rotary, 2-position, break-before-make Connectors—SW045: (3) DB15 female; SW046: (5) DB15 female Enclosure—High-impact plastic Power—None required Size—3.5"H x 6"W x 6.3"D (8.9 x 15.2 x 16 cm) Weight—1.5 lb. (0.7 kg) - Page 5 ETHERNET TRANSCEIVER SWITCHES 2. Introduction 2.1 Typical Application With an Ethernet Transceiver Switch, you can switch one Ethernet device or segment between two Ethernet networks (see Figure 1). A rotary switch on the front panel controls this operation. Device Device Device Switch Device...
- Page 6 ETHERNET TRANSCEIVER SWITCHES Figure 2. SW045 Rear Panel. Figure 3. SW046 Rear Panel.
-
Page 7: Installation
ETHERNET TRANSCEIVER SWITCHES 3. Installation 1. Connect the cable from the device you want to share to the “C” connector on the rear panel of the switch. 2. Connect the cables from the devices that are to be switched to connectors “A” and “B”... -
Page 8: Operation
ETHERNET TRANSCEIVER SWITCHES 4. Operation The rotary switch on the front panel controls the switching of the common connector “C” to connector “A” or “B” of the SW045 (see Figure 4 and Table 1) or connector “A,” “B,” “D,” or “E” of the SW046 (see Figure 5 and Table 2). ABC Switch Figure 4. - Page 9 ETHERNET TRANSCEIVER SWITCHES ABCDE Switch Figure 5. Front Panel of the SW046. Table 2. Switch Positions of the SW046 Switch Position Connection Device “C” is connected to device “A” Device “C” is connected to device “B” Device “C” is connected to device “D” Device “C”...
Need help?
Do you have a question about the ABC Series and is the answer not in the manual?
Questions and answers