Specifications, Entero™ Se 16 Audio Processor; Se 16 Audio Processor Chassis With No Modules Installed - Bose Entero SE 16 Service Manual

Entero™ SE 16 Audio Processor
Technical Information
Inputs/Outputs: Up to 16/16
Power Supply:
Operates on universal input power
supply with any mains voltage from
80-265VAC, 50-60Hz
Maximum Power Consumption:
240 Watts
Network Input/Output:
LonWorks ® 8 pin RJ45
Dimensions:
3.5"H x 19"W x 15.5"D, nominal
(8.9 cm x 48.3 cm x 39.37 cm)
2 U in a standard full rack
Weight:
9 lb (4 kg) approx., according to number
of modules installed
Technical Specifications for a Simple
Configuration
In a very basic system design, the chassis
configuration could include 2 input
modules, 2 output modules, and 2 router
modules, to produce the following
specifications.
Maximum Output: +17dBV
Gain: 0dB nominal
Dynamic Range: 113dB
Harmonic Distortion and Noise:
0.05% nominal, 0.10% limit
Crosstalk at 1kHz: -70dB
Frequency Response:
20Hz to 20kHz referenced at 1kHz, ±1dB
SPECIFICATIONS
Features:
• Signal processing for up to 16 channels
• Capacity for 4 DSP modules
• Supports both analog and digital signal
• Input compatibility with microphones and
• Output compatibility with power
• Internal routing and summing of any
• Network control through LonWorks and
• Assignment of any system control
SE 16 audio processor chassis with no
5
with 16 inputs and outputs
(with 4 in x 4 out for each)
processing technology
line level sources, balanced and
unbalanced
amplifers and other line-level equipment
sources to any output
compatible devices, including amplifiers
and video, lighting, and other networked
devices
function to any user interface, whether
computer-based or not
Chassis rear
Chassis front
modules installed